PICANOL RAPIER WEAVING MACHINES
................ 6 Sets Model GTX-6R-190CM Year 1996
___________________________________________________________________________
Main Specifications=
Width: Max. usable reed width 190cm Min. 110cm
Asymmetrical or symmetrical width reduction
Monitoring: Integrated microprocessor monitoring and controlling all major mechanical and electronic functions,
with keyboard and display. Connection for memory module.
Sensitivity of detection and control through micro-processor.
Foreseen for bidirectinal communication. With 4-colour light column for stop indictations.
Reed Motion: Balanced sley driven by 2 sets of conjugated cams, reedholder for clampled reeds of 8mm.
Rapiers: LHS and RHS flexible rapiers and gripper heads included. Suction and blowing device eliminating dust.
Filling Detection: Piezo-Electronic- 6channels- with double pick protection type-1. With filling detection and insertion (FDEI)
Colour Selection: Electronic-magnetic independant colour selectory, with 6 presentors - monitored by microprocessor
Harness Drive: With suspension elements for 22 harnesses. With quick attachment - healds length 13inch.
Pick-Finding: Electrono-Magnetic automatic pickfinding and slow motion device driven by independant motor
Beam Bearings: Standard
Let-Off Motion: Micro-processor controlled, with continuous driven AC Motor, reduction ratio 1/2
Back-Rest: Double back rest with hard-chromium plated rollers on ball bearings
-back rest roll dia. 133mm, tension roll dia. 89mm with warp tension measuring device TSF
Warp Stop Motion: Electrical ACTEX - pitch 30mm, max. possible capacity 6 electrodes,
with 6 serrated electrodes, with broken end finding handle
Cloth-Roll take-up: Sandroller is rubber covering. Pressure rollers is rubber conti-s covering.
Cloth roll winding in the machine with smooth anti-crease roll, wiht metalized cloth roll, tube dia. 89mm
Take-Up Motion: Electronic take-up synchronized with shedding motion (ETU)
Selvedges: Independant selvedge motion by conjugated cams. 2 ends leno left and right - type Klocker.
Leno bobbin track RHS and LHS for 8 bobbins each. Mechanical selvedge cutters on both sides
Lubrication: -Sley, rapier drive and slow motion mechanism are running in oil bath with continuous
forced oil circulation (high pressure pump and filter)
- Take-up, selvedge and let-off motion working in closed oil bath
-Centralised greasing points at weaver side.
Machine Drive: -Electro-motor drives the machine through electro-magnetic clutch and brake unit, brake and starting power
are monitored, controlled, and set by the microprocessor. - High speed main shaft (speed - 5x machine speed)
- Machine speed from 314 to 390ppm
Power Supply: Voltage 380V , Frequency 50Cycles
Shedding Motion: Low built Staubli 2660R type electronic, frame for max. 24hooks, equipped with 22-hooks for shedding motion
Weft Supply: 2 Vertical bobbinracks for 8 bobbins each with separate fixation stand for weft accumulator heads.
- 4 weft accumulators with sensor and brush brake. - Feeding unit for 4-heads